Dodge 2010 Charger User Manual download pdf (Page 32)

100

101

Automatic Door Locks Programming

The Automatic Door Locks feature can be enabled or

disabled as follows:

•

For vehicles equipped with the Electronic Vehicle

Information Center (EVIC), refer to “Electronic Vehicle

Information Center (EVIC) — If Equipped/Personal

Settings (Customer-Programmable Features)” in “Un-

derstanding Your Instrument Panel” for further infor-

mation.

•

For vehicles not equipped with the EVIC, perform the

following procedure:

1. Close all doors and place the Key Fob in the ignition

switch.

2. Cycle the ignition switch between LOCK and ON and

then back to LOCK four times ending up in the LOCK

position (do not start the engine).

3. Press the power door LOCK switch to lock the doors.

4. A single chime will indicate the completion of the

programming.

5. Cycle the ignition after performing steps one to four

for the feature to be enabled or disabled.

6. Repeat these steps if you want to return this feature to

its previous setting.

NOTE: Use the Automatic Door Locks feature in accor-

dance with local laws.

Automatic Unlock Doors on Exit

The doors will unlock automatically on vehicles with

power door locks if:

1. The Automatic Unlock Doors On Exit feature is en-

abled.

2. The transmission was in gear and the vehicle speed

returned to 0 mph (0 km/h).

3. The transmission is in NEUTRAL or PARK.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 483 484

Comments to this Manuals

No comments

Dodge 2010 Charger User Manual Page 32

Comments to this Manuals

Related products and manuals for Cars Dodge 2010 Charger