Dodge 2010 Charger User Manual download pdf (Page 22)

100

101

Remote Key Unlock, Driver Door/All Doors 1st

Press

This feature lets you program the system to unlock either

the driver’s door or all doors on the first press of the

UNLOCK button on the RKE transmitter. To change the

current setting, proceed as follows:

•

For vehicles equipped with the Electronic Vehicle

Information Center (EVIC), refer to “Electronic Vehicle

Information Center (EVIC)/Personal Settings

(Customer-Programmable Features)” in “Understand-

ing Your Instrument Panel” for further information.

•

For vehicles not equipped with the EVIC, perform the

following procedure:

1. Press and hold the LOCK button on a programmed

RKE transmitter for at least 4 seconds, but no longer than

10 seconds. Then, press and hold the UNLOCK button

while still holding the LOCK button.

2. Release both buttons at the same time.

3. Test the feature while outside of the vehicle by press-

ing the LOCK/UNLOCK buttons on the RKE transmitter

with the ignition switch in the LOCK position and the

Key Fob removed.

4. Repeat these steps if you want to return this feature to

its previous setting.

NOTE: Pressing the LOCK button on the RKE transmit-

ter while you are inside the vehicle will activate the

security alarm. Opening a door with the Vehicle Security

Alarm activated will cause the alarm to sound. Press the

UNLOCK button to deactivate the security alarm.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 483 484

Comments to this Manuals

No comments

Dodge 2010 Charger User Manual Page 22

Comments to this Manuals

Related products and manuals for Cars Dodge 2010 Charger