Dodge 2010 Charger User Manual download pdf (Page 76)

100

101

The seat belt must be in the Automatic Locking Mode in

order to enable a child restraint to be tightly installed.

Refer to “Automatic Locking Mode”. A locking clip

should not be necessary once the automatic locking

feature is enabled. Position the shoulder and lap belt on

the child restraint. The automatic locking retractor is

activated by first attaching the child seat, then pulling all

of the webbing out of the retractor, then allowing the

webbing to retract back into the retractor. Tighten web-

bing. To release, simply unbuckle the seat belt by de-

pressing the button, allowing the webbing to retract into

the retractor.

In the rear seat, you may have trouble tightening the

lap/shoulder belt on the child restraint because the

buckle or latch plate is too close to the belt path opening

on the restraint. Disconnect the latch plate from the

buckle and twist the short buckle end belt several times

to shorten it. Insert the latch plate into the buckle with the

release button facing out.

If the belt still can’t be tightened, or if pulling and

pushing on the restraint loosens the belt, you may need

to do something more. Disconnect the latch plate from

the buckle, turn the buckle around, and insert the latch

plate into the buckle again. If you still can’t make the

child restraint secure, try a different seating position.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 483 484

Comments to this Manuals

No comments

Dodge 2010 Charger User Manual Page 76

Comments to this Manuals

Related products and manuals for Cars Dodge 2010 Charger