Dodge Challenger SRT8 2013 User's Guide download pdf (Page 93)

BATTERY LOCATION

• The battery is stored under an access cover in the trunk. Remote battery posts are

located on the right side of the engine compartment for jump-starting.

TIREFIT KIT

• Small punctures up to 1/4 in (6 mm) in the tire tread can be sealed with TIREFIT. Foreign

objects (e.g., screws or nails) should not be removed from the tire. TIREFIT can be used in

outside temperatures down to approximately -4°F (-20°C).

• This kit will provide a temporary tire seal, allowing you to drive your vehicle up to 100 miles

(160 km) with a maximum speed of 55 mph (88 km/h).

TIREFIT Storage

• The TIREFIT kit is located in the trunk.

TIREFIT Kit Components And Operation

1. Sealant Bottle 5. Mode Select Knob

2. Deflation Button 6. Sealant Hose (Clear)

3. Pressure Gauge 7. Air Pump Hose (Black)

4. Power Button 8. Power Plug

Using The Mode Select Knob And Hoses

• Your TIREFIT kit is equipped with the following symbols to indicate the air or sealant

mode.

Selecting Air Mode

• Turn the Mode Select Knob (5) to this position for air pump operation only. Use the Black

Air Pump Hose (7) when selecting this mode.

Selecting Sealant Mode

• Turn the Mode Select Knob (5) to this position to inject the TIREFIT Sealant and to inflate

the tire. Use the Sealant Hose (clear hose) (6) when selecting this mode.

WHAT TO DO IN EMERGENCIES

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 139 140

No comments

Dodge Challenger SRT8 2013 User's Guide Page 93