Dodge Challenger SRT8 2013 User's Guide download pdf (Page 28)

SPEED CONTROL

• The electronic speed control switches are

located on the steering wheel.

Cruise ON/OFF

• Push the ON/OFF button to activate the

Electronic Speed Control.

• CRUISE

will appear on the instrument

cluster to indicate the Electronic Speed

Control is on.

• Push the ON/OFF button a second time to

turn the system off.

Set

• With the Speed Control on, push and re-

lease the SET – button to set a desired

speed.

Accel/Decel

• Once a speed is set, pushing the RES + button once or the SET – button once will increase

or decrease the set speed approximately 1 mph (2 km/h).

• Push and hold the RES + button to accelerate in 5 mph (8 km/h) increments or push and

hold the SET – button to decelerate in 5 mph (8 km/h) increments; release the button to

save the new set speed.

Resume

• To resume a previously selected set speed in memory, push the RES + button and release.

Cancel

• Push the CANCEL button, or apply the brakes to cancel the set speed and maintain the set

speed memory.

• Push the ON/OFF button to turn the system off and erase the set speed memory.

WARNING!

• Leaving the Electronic Speed Control system on when not in use is dangerous. You

could accidentally set the system or cause it to go faster than you want. You could

lose control and have a collision. Always leave the Electronic Speed Control system

off when you are not using it.

• Electronic Speed Control can be dangerous where the system cannot maintain a

constant speed. Your vehicle could go too fast for the conditions, and you could lose

control. A collision could be the result. Do not use Electronic Speed Control in heavy

traffic or on roads that are winding, icy, snow-covered or slippery.

OPERATING YOUR VEHICLE

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 139 140

No comments

Dodge Challenger SRT8 2013 User's Guide Page 28