Dodge 2012 Ram Truck Gas 3500 Owner's Manual download pdf (Page 16)

Installing The Lower Attachments:

• The vehicle lower anchorages are round bars located at the rear of the seat

cushion where it meets the seatback. The rear seat lower anchors can be

readily identified by the symbol

located on the seatback directly above

the anchorages and are just visible when you lean into the rear seat to install

the child restraint.

• Loosen the child seat adjusters on

the lower straps and on the tether

strap so that you can attach the

hooks or connectors to the vehicle

anchors more easily.

• Attach the lower hooks or

connectors over the top of the

seatcover material.

• Then tighten the straps as you push

the child restraint rearward and

downward into the seat.

Tether Anchorage Points At The Right And Center Front Seat (Regular Cab - All

Seats):

• Place the child restraint on the seat and adjust the tether strap so that it will

reach over the seat back under the head restraint to the tether anchor directly

behind the seat.

• Lift the cover (if equipped), and

attach the hook to the square

opening in the sheet metal.

• Install the child restraint and remove

the slack in the tether strap

according to the manufacturer's

instructions.

Child Restraint Installation Sequence (Mega Cab

- Rear Seats):

• Place a child restraint on each outboard rear seat and adjust the tether strap

so that it will reach under the head restraint to the tether anchor directly

behind the seat.

• Lift the cover, and attach the hook to the square opening in the sheet metal.

• Install the child restraint and remove the slack in the tether strap according to

the manufacturer's instructions.

GETTING STARTED

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 155 156

No comments

Dodge 2012 Ram Truck Gas 3500 Owner's Manual Page 16