Dodge 2012 Caliber Owner's Manual download pdf (Page 224)

100

101

press and release (less than one second) the EVIC button

several times until “Compass Variance” is highlighted.

The “Compass Variance” message and the current vari-

ance zone number will be displayed. To change the zone,

press and hold (longer than two seconds) the EVIC

button to increment the variance one step. Repeat as

necessary, with individual long (for at least one second)

EVIC button presses for each increment, until the desired

variance is achieved. To exit the Variance Programming,

press the EVIC button with a short (less than one second)

button press.

NOTE: The factory default Zone is 8. During program-

ming, the Zone value will wrap around from Zone 15 to

Zone 1.

Manual Compass Calibration

If the compass appears erratic or inaccurate, and the

variance has been properly set, you may wish to manu-

ally recalibrate the compass. To manually calibrate the

compass:

1. Start the engine and leave the transmission in the

PARK position.

2. Using a quick button press (less than one second),

press and release the EVIC button several times until the

EVIC displays the “Personal Settings - Press & Hold”.

Press and Hold the EVIC button to enter the Personal

Settings Sub-Menu.

3. Once in the Personal Settings Sub-Menu, press and

release (less than one second) the EVIC button several

times until “Calibrate Compass (Yes)” is displayed.

222 UNDERSTANDING YOUR INSTRUMENT PANEL

1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 501 502

Comments to this Manuals

No comments

Dodge 2012 Caliber Owner's Manual Page 224

Comments to this Manuals

Related products and manuals for Cars Dodge 2012 Caliber