Dodge 2012 Caliber Owner's Manual download pdf (Page 170)

100

101

2. Press and hold the desired HomeLink威 button until

the indicator light begins to flash after 20 seconds. Do not

release the button.

3. Without releasing the button proceed with “Program-

ming A Rolling Code” Step 2 and follow all remaining

steps.

Programming A Non-Rolling Code

For programming Garage Door Openers manufactured

before 1995.

1. Turn the ignition switch to the ON/RUN position.

2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm)

away from the HomeLink威 button you wish to program

while keeping the HomeLink威 indicator light in view.

3. Simultaneously press and hold both the Homelink威

button you want to program and the hand-held transmit-

ter button.

4. Continue to hold both buttons and observe the indi-

cator light. The Homelink威 indicator will flash slowly

and then rapidly after Homelink威 has received the fre-

quency signal from the hand-held transmitter. Release

both buttons after the indicator light changes from slow

to rapid.

5. Press and hold the programmed HomeLink威 button

and observe the indicator light.

•

If the indicator light stays on constantly, program-

ming is complete and the garage door/device

should activate when the HomeLink威 button is

pressed.

•

To program the two remaining HomeLink威 buttons,

repeat each step for each remaining button. DO

NOT erase the channels.

168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 501 502

Comments to this Manuals

No comments

Dodge 2012 Caliber Owner's Manual Page 170

Comments to this Manuals

Related products and manuals for Cars Dodge 2012 Caliber