Dodge 2013 Challenger_SRT - User Guide User Manual download pdf (Page 89)

•Unlessreset,thismessagewillcontinuetodisplayeachtimeyouturntheignitionswitch

to the ON/RUN position or cycle the ignition to the ON/RUN position if equipped with

Keyless Enter-N-Go™. To turn off the message temporarily , press and release the MENU

button. To reset the oil change indicator system (after performing the scheduled main-

tenance) refer to the following procedure.

Vehicles Equipped With Keyless Enter-N-Go™

1. Without pressing the brake pedal, cycle the ignition to the ON/RUN position (Do not start

the engine).

2. Fully depress the accelerator pedal, slowly, three times within 10 seconds.

3. Cycle the ignition to the OFF/LOCK position.

Vehicles Not Equipped With Keyless Enter-N-Go™

1. Turn the ignition switch to the ON/RUN position (Do not start the engine).

2. Fully depress the accelerator pedal, slowly, three times within 10 seconds.

3. Turn the ignition switch to the OFF/LOCK position.

NOTE:

If the indicator message illuminates when you start the vehicle, the oil change indicator

system did not reset. If necessary, repeat this procedure.

Resetting The Light After Servicing

Vehicles Equipped With Keyless Enter-N-Go™

•Withoutpressingthebrakepedal,pushtheENGINESTART/STOPbuttonandcyclethe

ignition to the ON/RUN position (Do not start the engine.)

•Fullydepresstheacceleratorpedal,slowly,threetimeswithin10seconds.

•Withoutpressingthebrakepedal,pushtheENGINESTART/STOPbuttononcetoreturn

the ignition to the OFF/LOCK position.

Vehicles Not Equipped With Keyless Enter-N-Go™

•TurntheignitionswitchtotheON/RUNposition(Donotstarttheengine.)

•Fullydepresstheacceleratorpedal,slowly,threetimeswithin10seconds.

•TurntheignitionswitchtotheOFF/LOCKposition.

NOTE:

If the indicator message illuminates when you start the vehicle, the oil change indicator

system did not reset. If necessary, repeat this procedure.

WHAT TO DO IN EMERGENCIES

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 139 140

No comments

Dodge 2013 Challenger_SRT - User Guide User Manual Page 89