Dodge JR41 User Manual download pdf (Page 203)

Windshield Wiper Blades

Clean the rubber edges of the wiper blades and the

windshield periodically with a sponge or soft cloth and a

mild non abrasive cleaner. This will remove accumula-

tions of salt or road film.

Operation of the wipers on dry glass for long periods

may cause deterioration of the wiper blades. Always use

washer fluidwhen using the wipers to remove salt or dirt

from a dry windshield. Avoid using the wiper blades to

remove frost or ice from the windshield. Keep the blade

rubber out of contact with petroleum products such as

engine oil, gasoline, etc.

Windshield Wiper Blade Replacement

•

Lift the wiper arm away from the glass.

•

Push the release tab and slide the wiper blade assem-

bly away from the wiper arm. Gently place the wiper

arm on the windshield.

•

Install the new blade assembly onto the wiper arm tip

until it locks in place.

Windshield Washers

The fluid reservoir in the engine compartment should be

checked for fluid level at regular intervals. Fill the

reservoir with windshield antifreeze (not radiator anti-

freeze) rated not to freeze at -25°F (-31°C). Operate the

system for a few seconds to flush out the residual water.

MAINTAINING YOUR VEHICLE 203

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 272 273

No comments

Dodge JR41 User Manual Page 203