Dodge JR41 User Manual download pdf (Page 135)

Four Speed Automatic Transaxle

The electronically controlled transaxle provides a precise

shift schedule. The transaxle electronics are self calibrat-

ing; therefore, thefirst few shifts on a new vehicle may be

somewhat abrupt. This is a normal condition, and preci-

sion shifts will develop within a few shift cycles.

Reset Mode

The transaxle is monitored electronically for abnormal

conditions. If a condition is detected that could cause

damage, the transaxle shifts automatically into second

gear. The transaxle remains in second gear despite the

forward gear selected. Park (P), Reverse (R), and Neutral

(N) will continue to operate. This Resetfeature allows the

vehicle to be driven to a dealer for service without

damaging the transaxle.

In the event that the problem has been momentary, the

transaxle can be reset to regain all forward gears.

Stop the vehicle and shift into Park (P).

Turn the Key to LOCK then restart the engine.

Shift into D and resume driving.

NOTE:

Even if the transaxle can be reset, it is recom-

mended that you visit a dealer at your earliest possible

convenience. Your dealer has diagnostic equipment to

determine if the problem could recur.

If the transaxle cannot be reset, dealer service is required.

Gear Ranges For Four Speed Automatic

Transaxle

DO NOT race the engine when shifting from PARK or

NEUTRAL positions into another gear range.

NOTE:

If the key is in the RUN position, you must

press the brake pedal to shiftout of the “P” Parkposition.

“P” Park

Supplements parking by locking the transaxle. Engine

can be started in this range. Never attempt to use PARK

while vehicle is in motion.

Apply parking brake when leaving the vehicle in this

range.

STARTING AND OPERATING 135

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 272 273

No comments

Dodge JR41 User Manual Page 135