Dodge 2006 sprinter cargo Specifications download pdf (Page 60)

3.14

Frame and Chassis

3.5.3 Loading Cranes

The crane size must be matched to the chassis size.

Ensure that the vehicle is stable when crane is in use.

Limit sewing range of crane as required.

3.5.3.1 Loading crane mounted behind cab

The loading crane and supporting structure must not have

an effect on the operation of other components.

Mount loading crane on a steel mounting frame.

Mounting frame

– Maximum moment on loading crane (kN x l): 25 kNm

– Moment of resistance (W

) for mounting frame

longitudinal member: 45 cm

– For channel dimension of longitudinal mounting-frame

members, see page 3.16. The dimension for the

longitudinal mounting-frame members in the area of a

platform or dump truck bodies are given in the table

for platform bodies and dump truck bodies on page

3.17.

– To prevent vehicle tipping, install outriggers for each

crane. We recommend hydraulic outriggers.

– To prevent frame damage do not lift vehicle with

outriggers.

– To avoid accidents mark outriggers extending beyond

the vehicle during stationary operation with

conspicuous colors, reflectors and warning lights.

– Calculate the platform length according to the position

and weight of the loading crane. Do not exceed

permissible axle loads.

– Do not exceed maximum crane load moments. The

crane mount must be reinforced. To prevent vehicle

tipping, use vehicle only on level, paved roads.

– The resulting load distribution may make extension of

the frame necessary.

Disregarding these directions may cause the

vehicle to tip over. This may lead to serious injury

or death.

Disregarding these directions may cause the

vehicle to tip over. This may lead to serious injury

or death.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 118 119

No comments

Dodge 2006 sprinter cargo Specifications Page 60