Dodge 2006 sprinter cargo Specifications download pdf (Page 113)

Other Additional Information

13.7

13.5.4 Seals

Carefully seal ducts, joints and slots between the engine

compartment, the underside of the vehicle, and the

splashboard to the vehicle interior with resilient material.

Do not position airing and ventilation openings in the

immediate vicinity of sources of noise. Always consult with

suppliers of soundproofing materials to ensure

compliance with national safety laws and regulations.

13.6 Special Notes on the

Installation and Use of Roof

Racks

Sprinters with standard box type bodies may be equipped

with roof racks. When mounting the roof rack, please

observe the following guidelines:

– A maximum load capacity of 300 kg on vehicles with

standard roofs and 150 kg on the vehicles with high

roofs is permissible if the load is evenly distributed

over the entire roof area.

– A stabilizer must be installed on the front axle.

– The roof rack must have at least 5 legs on each side

for a 300 kg roof load or 4 legs on each side for a 150

kg roof load. Always space the legs evenly!

– Reduce the load proportionally if a shorter roof rack is

used.

1. Roof rack

2. Support bracket (length min. 80 mm)

3. Bracket

Exceeding maximum load capacity adversely

affects the center of gravity of the vehicle, reduces

vehicle stability, and may cause rollover, serious

injury or death.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 119

No comments

Dodge 2006 sprinter cargo Specifications Page 113