Dodge 4500 Ram Chassis Cab vehicle Installation Guide download pdf (Page 3)

PTO Quick Start Information

This section will give you specific instructions on how to wire a PTO on the 2013 3500/4500/5500

models. The information is tailored toward those familiar with PTO installation on the 2007 to 2012 but

can be equally helpful to anyone installing a PTO.

Wire Locations

There are two connectors under the dash which are used. They are the same connectors as previous

years, but their locations are altered.

Both of these connectors are located behind the VISM module towards the front of the vehicle. The

VISM module is the black plastic module next to the park brake bracket . The view above shows the

connectors on a vehicle that does not have a VISM module as it would block the view of these

connectors. The white connector is ‘tear taped’ in place and can be accessed by pulling the connector

and tearing the tape without pulling on the wires themselves. The gray connector is tie wrapped in

place so the tie wrap must be cut to access the gray connector.

White

Connector

Gray

Connector

•Main Menu

•Index

OUT

ALL

•Chassis Cab Home

2014 Chassis Cab PTO Operation & Installation Guide

08/01/2013

1 2 3 4 5 6 7 8 ... 21 22

No comments

Dodge 4500 Ram Chassis Cab vehicle Installation Guide Page 3