Dodge 2010 Nitro User Manual download pdf (Page 322)

100

101

NOTE: During severe braking conditions, a pulsing

sensation may occur and a clicking noise will be heard.

This is normal, indicating that the ABS is functioning.

•

Do not “ride” the brakes by resting your foot on the

pedal. This could overheat the brakes and result in

unpredictable braking action, longer stopping dis-

tances, or brake damage.

•

When descending mountains or hills, repeated brak-

ing can cause brake fade with loss of braking control.

Avoid repeated heavy braking by downshifting the

transmission or locking out overdrive whenever pos-

sible.

•

Engines may idle at higher speeds during warm-up,

which could cause rear wheels to spin and result in

loss of vehicle control. Be especially careful while

driving on slippery roads, in close-quarter maneuver-

ing, parking, or stopping.

•

Do not drive too fast for road conditions, especially

when roads are wet or slushy. A wedge of water can

build up between the tire tread and the road. This

hydroplaning action can cause loss of traction, braking

ability, and control.

•

After going through deep water or a car wash, brakes

may become wet, resulting in decreased performance

and unpredictable braking action. Dry the brakes by

gentle, intermittent pedal action while driving at very

slow speeds.

ELECTRONIC BRAKE CONTROL SYSTEM

Your vehicle is equipped with an advanced electronic

brake control system that includes an Anti-Lock Brake

System (ABS), Traction Control System (TCS), Brake Assist

System (BAS), Electronic Roll Mitigation (ERM) and Elec-

tronic Stability Program (ESP). All five systems work

together to enhance vehicle stability and control in various

driving conditions and are commonly referred to as ESP.

STARTING AND OPERATING 321

1 2 ... 317 318 319 320 321 322 323 324 325 326 327 ... 497 498

Comments to this Manuals

No comments

Dodge 2010 Nitro User Manual Page 322

Comments to this Manuals

Related products and manuals for Cars Dodge 2010 Nitro