Dodge 2010 Nitro User Manual download pdf (Page 211)

100

101

•

Magnetic materials should be kept away from the top

of the right rear quarter window. This is where the

compass sensor is located.

To Set the Variance

Start the engine and leave the transmission gear selector

lever in the PARK position. Press and hold the CMTC

reset button (for approximately ten seconds) until the

current variance zone number is displayed. To change the

zone, press and release the CMTC reset button to increase

the variance one step. Repeat as necessary until the

desired variance is achieved.

NOTE: The factory default zone is 8. During program-

ming, the zone value will wrap around from zone 15 to

zone 1.

Manual Compass Calibration

If the compass appears erratic inaccurate or abnormal,

you may wish to calibrate the compass. Prior to calibrat-

ing the compass, make sure the proper zone is selected.

1. Start the engine and leave the transmission in the

PARK position.

2. Press and hold the CMTC reset button (for approxi-

mately 10 seconds) until the current variance zone num-

ber is displayed.

Compass Variance Map

210 UNDERSTANDING YOUR INSTRUMENT PANEL

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 497 498

Comments to this Manuals

No comments

Dodge 2010 Nitro User Manual Page 211

Comments to this Manuals

Related products and manuals for Cars Dodge 2010 Nitro