Dodge 2009 Challenger SRT8 Owner's Manual download pdf (Page 331)

100

101

3. Set the parking brake, place the automatic transmis-

sion in PARK (manual transmission in NEUTRAL), and

turn the ignition switch to the LOCK position on both

vehicles.

4. Turn off the heater, radio, and all unnecessary electri-

cal loads.

5. Connect one end of the jumper cable to the remote

jump-start positive battery post (+) in the engine com-

partment. Connect the other end of the same cable to the

positive terminal of the booster battery. Refer to the

following illustration for jump-starting connections.

6. Connect the other cable, first to the negative terminal

of the booster battery and then to the engine ground (-)

of the vehicle with the discharged battery. Make sure

you have a good contact on the engine ground. Refer to

the following illustration for jump-starting connections.

7. Start the engine in the vehicle that has the booster

battery. Let the engine idle a few minutes. Then, start the

engine in the vehicle with the discharged battery.

NOTE: Refer to ⬙Synchronizing ESP⬙ under ⬙Electronic

Stability Program⬙ in Section 5 if the ESP/BAS light (in

Jump-Starting

WHAT TO DO IN EMERGENCIES 329

1 2 ... 326 327 328 329 330 331 332 333 334 335 336 ... 439 440

Comments to this Manuals

No comments

Dodge 2009 Challenger SRT8 Owner's Manual Page 331

Comments to this Manuals

Related products and manuals for Cars Dodge 2009 Challenger SRT8