Dodge 2009 Challenger SRT8 Owner's Manual download pdf (Page 247)

100

101

Do not press the accelerator. Use the Fob with Integrated

Key to briefly turn the ignition switch to the START

position and release it as soon as the starter engages. The

starter motor will continue to run, and it will disengage

automatically when the engine is running. If the engine

fails to start, the starter will disengage automatically in

10 seconds. If this occurs, turn the ignition switch to the

LOCK position, wait 10 to 15 seconds, then repeat the

“Normal Starting” procedure.

Keyless Go

This feature allows the driver to oper-

ate the ignition switch with the push

of a button, as long as the ENGINE

START/STOP button is installed and

the Remote Keyless Entry transmitter

is in the passenger compartment.

Installing and Removing the ENGINE

START/STOP Button

Installing the Button

1. Remove the ignition key.

2. Insert the ENGINE START/STOP button into the

ignition switch with the lettering facing up and readable.

3. Press firmly on the center of the button to secure it into

position.

Removing the Button

1. The ENGINE START/STOP button can be removed

from the ignition switch for regular ignition key use.

2. Insert the metal part of the valet key under the chrome

bezel at the 6 o’clock position and gently pry the button

loose.

STARTING AND OPERATING 245

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 439 440

Comments to this Manuals

No comments

Dodge 2009 Challenger SRT8 Owner's Manual Page 247

Comments to this Manuals

Related products and manuals for Cars Dodge 2009 Challenger SRT8