Dodge Ram Power Wagon Operations Instructions download pdf (Page 376)

100

101

Insure nylon tubing in these areas has not melted or

collapsed.

Inspect all hose connections such as clamps and cou-

plings to make sure they are secure and no leaks are

present.

Components should be replaced immediately if there is

any evidence of wear or damage that could cause failure.

Brake System

Power Disc Brakes (front and rear)

Disc brakes do not require adjustment; however, several

hard stops during the break-in period are recommended

to seat the linings and wear off any foreign material.

Brake Master Cylinder

The fluid level of the master cylinder should be checked

when performing under the hood service, or immedi-

ately if the brake system warning lamp indicates system

failure.

The brake master cylinder has a translucent plastic

reservoir. On the outboard side of the reservoir, there is a

“MAX” dot and an “MIN” dot. The fluid level must be

kept within these two dots. Do not add fluid above the

MAX mark, because leakage may occur at the cap.

With disc brakes the fluid level can be expected to fall as

the brake linings wear. However, an unexpected drop in

fluid level may be caused by a leak and a system check

should be conducted.

Refer to Recommended Fluids, Lubricants and Genuine

Parts for the correct Fluid type.

376 MAINTAINING YOUR VEHICLE

1 2 ... 371 372 373 374 375 376 377 378 379 380 381 ... 454 455

Comments to this Manuals

No comments

Dodge Ram Power Wagon Operations Instructions Page 376

Comments to this Manuals

Related products and manuals for Cars Dodge Ram Power Wagon