Dodge 2008 LC22 Challenger SRT8 Specifications download pdf (Page 300)

Trip Odometer button to turn off the message. If the

problem continues, the message will appear the next time

the vehicle is started.

A loose, improperly installed, or damaged fuel filler cap

may also turn on the MIL.

EMISSIONS INSPECTION AND MAINTENANCE

PROGRAMS

In some localities, it may be a legal requirement to pass

an inspection of this vehicle’s emissions control system.

Failure to pass could prevent vehicle registration.

For states that require an Inspection and Mainte-

nance (I/M), this check verifies the Malfunction

Indicator Light (MIL) is functioning and is not on

when the engine is running, and that the OBD II system

is ready for testing.

Normally, the OBD II system will be ready. The OBD II

system may not be ready if the vehicle was recently

serviced, recently had a dead battery, or a battery replace-

ment. If the OBD II system should be determined not

ready for the I/M test, the vehicle may fail the test.

This vehicle has a simple ignition key-actuated test,

which you can use prior to going to the test station. To

check if this vehicle’s OBD II system is ready, you must

do the following:

1. Insert the ignition key into the ignition switch.

2. Turn the ignition to the ON position, but do not crank

or start the engine.

3. If you crank or start the engine, you will have to start

this test over.

4. As soon as you turn the ignition key to the ON

position, you will see the MIL symbol come on as part of

a normal bulb check.

298 MAINTAINING YOUR VEHICLE

1 2 ... 295 296 297 298 299 300 301 302 303 304 305 ... 384 385

No comments

Dodge 2008 LC22 Challenger SRT8 Specifications Page 300