Dodge RAM 1500 2010 Owner's Manual download pdf (Page 7)

7 ‘09-’10 1500 Front Leveling - Kit DL229

Prepare to Install Rear Kit

1. Loosen, but do not remove, lug nuts on each rear

wheel.

2. Using a hydraulic floor jack, slowly lift rear axle until

front tires are 3-5” off ground. Position jack stands

under frame. Lower vehicle onto jack stands while

maintaining hydraulic jack pressure underneath front

of vehicle.

3. Remove lug nuts and rear wheels from vehicle.

4. Remove two lower nuts from both rear sway bar end

links.

5. Remove two lower bolts from both rear shocks.

WARNING

Compressed coil springs can expand violently causing

serious personal injury. Use caution when using coil

spring compressors.

WARNING

Use extreme caution when lifting vehicle from ground.

To prevent serious personal injury, ensure the lifting

device is securely placed.

Remove Nut,

Washer

Sway Bar

End Link

Sway Bar

Rear Shock

Remove Bolt

From Rear

Shock

6. Remove ABS lines from there clips and ensure that

there is plenty of slack in the ABS & brake lines

when lowering axle housing.

7. Carefully lower rear axle until rear coils come free

from upper mount. Proceed by removing the rear

coils from the rear axle.

8. Removing rear coil spring Isolator from both coil

spring.

Install Rear Coil Spacer Kit

1. Place kit rear coil spring spacer on both rear coil

springs. Place rear coil springs back onto rear axle

and frame mounts.

2. Install two lower bolts into both rear shocks. (Note:

Careful when compressing rear axle, the load is

Brake line

Remove ABS

Line From

Clips

Remove Coil

Spring

Rear Axle

Housing

Replace

Isolator with Kit

Coil Spacer

Stock Isolator

Coil spring

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

Dodge RAM 1500 2010 Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Cars Dodge RAM 1500 2010