Dodge 2015 Charger-SRT - Owner Manual User Manual download pdf (Page 395)

100

101

• Launch Control is intended to be used on dry, paved

road surfaces only. Use on slippery or loose surfaces

may cause damage to vehicle components and is not

recommended.

Launch Control is available when the following proce-

dure is followed:

1. Push the LAUNCH button on the center stack switch

bank.

NOTE: Pushing the SRT button on the center stack or

pressing the “SRT & Apps” button on the touchscreen are

two other options to access launch control features.

Please refer to “Uconnect® Settings” within your Own-

er’s Manual on the DVD for further information.

2. Press the “Launch RPM Set-Up” button on the touch-

screen. This screen will allow you to adjust your

launch RPM’s for optimum launch/traction.

3. Press the “Activate Launch Mode” button on the

touchscreen.

4. Make sure the vehicle is not moving.

5. Make sure the steering wheel is pointing straight.

6. Hold the brake and make sure the vehicle is in

“Drive”.

7. While holding the brake, rapidly apply the accelerator

pedal to wide open throttle. The engine speed will

hold at the RPM that was set in the “Launch RPM

Set-up” screen.

NOTE: Messages will appear in the Driver Information

Display (DID) to inform the driver if one or more of the

above conditions have not been met.

8. When conditions 5 through 8 have been met, the

Driver Information Display (DID) will read “Launch

Ready Release Brake”.

STARTING AND OPERATING 393

1 2 ... 390 391 392 393 394 395 396 397 398 399 400 ... 594 595

Comments to this Manuals

No comments

Dodge 2015 Charger-SRT - Owner Manual User Manual Page 395

Comments to this Manuals

Related products and manuals for Cars Dodge 2015 Charger-SRT - Owner Manual