Dodge 2014 Durango Owner's Manual download pdf (Page 494)

100

101

9. Shift the transmission into PARK and turn the engine

OFF.

10. Release the brake pedal.

11. Disconnect vehicle from the tow vehicle.

12. Start the engine.

13. Press and hold the brake pedal.

14. Release the parking brake.

15. Shift the transmission into DRIVE, release the brake

pedal, and check that the vehicle operates normally.

NOTE:

• Steps 1 through 5 are requirements that must be met

before pressing the NEUTRAL (N) button, and must

continue to be met until the shift has been completed.

If any of these requirements are not met before press-

ing the NEUTRAL (N) button or are no longer met

during the shift, the NEUTRAL (N) indicator light will

flash continuously until all requirements are met or

until the NEUTRAL (N) button is released.

• The ignition switch must be in the ON/RUN position

for a shift to take place and for the position indicator

lights to be operable. If the ignition switch is not in the

ON/RUN position, the shift will not take place and no

position indicator lights will be on or flashing.

• A flashing NEUTRAL (N) position indicator light

indicates that shift requirements have not been met.

492 STARTING AND OPERATING

1 2 ... 489 490 491 492 493 494 495 496 497 498 499 ... 625 626

Comments to this Manuals

No comments

Dodge 2014 Durango Owner's Manual Page 494

Comments to this Manuals

Related products and manuals for Cars Dodge 2014 Durango