Dodge 2010 Dakota User's Guide download pdf (Page 33)

REAR CRATE 'N GO

®

STORAGE

• The rear Crate 'n Go

®

storage, located

under the rear seat lower cushion,

consists of two removable, collapsible

storage crates.

• To open the crates, lift upward on the

crate handles and engage the crate

end flaps.

• To remove the crate, press on the

release lever, located on the ends of

the base, and lift up on the crate.

• To install the crate into the base,

insert the crate into the inboard slot

and push down on the outboard side

of the crate, then snap into place.

• To collapse the crate, push the crate

end flaps inward to disengage. Push

the sides inward and snap into place.

REAR CARGO AREA UTILITY

RAILS

• There are four adjustable cleats in the

pick-up bed that can be used to assist

in securing cargo. Each cleat must be

located and tightened down in one of

the detents along either rail, in order

to keep cargo properly secure.

TAILGATE

Tailgate Removal

• To simplify mounting a camper unit

with an overhang, the tailgate can be

removed quickly. Follow these steps:

• Open the tailgate to a 45-degree

angle.

• Unclip and remove the cables from

the box while maintaining a

45-degree angle.

• Lift the tailgate off of the pivot on

the passenger side by pulling

upward and rearward at the same

time.

• Slide the tailgate to the passenger

side while making sure clearance

from the box and taillight is

maintained.

• To reinstall the tailgate, do the

following:

• Slide the tailgate onto the driver's

side pivot.

• Hold the tailgate at a 45 degree

angle and insert it into the

passenger side pivot.

• Clip the cables to the box.

31

UTILITY

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 71 72

Comments to this Manuals

No comments