Dodge 2010 Challenger - Owner Manual User Manual download pdf (Page 352)

100

101

4. Have the tire inspected and repaired or replaced at the

earliest opportunity at an authorized dealer or tire ser-

vice center.

5. Replace the Sealant Bottle (1) and Sealant Hose (6)

assembly at your authorized dealer as soon as possible.

Refer to “(F) Sealant Bottle and Hose Replacement.”

NOTE: When having the tire serviced advise the autho-

rized dealer or service center that the tire has been sealed

using the TIREFIT service kit.

(F) Sealant Bottle and Hose Replacement:

1. Uncoil the Sealant Hose (6).

2. Locate the rectangular Sealant Bottle release button in

the recessed area where you place your fingers to unlatch

the hoses (6) (7) from their storage area.

3. Use the yellow cap on end of the Sealant Hose (6) to

depress the Sealant Bottle release button. The Sealant

Bottle (1) will pop up. Remove the bottle and dispose of

it accordingly.

4. Clean any remaining sealant from the TIREFIT hous-

ing.

Position the new Sealant Bottle (1) to the housing so that

the Sealant Hose (6) aligns with the hose slot in the front of

the housing and the alignment keys on the bottom of the

bottle align with the alignment slots in the housing. Then,

press the bottle into the housing. An audible click will be

heard, indicating the bottle is locked in place.

6. Verify the yellow cap is installed on the fitting at the

end of the Sealant Hose (6) and return the hose to its

storage area (located on the bottom of the air pump).

7. Return the TIREFIT kit to its storage location in the

vehicle.

350 WHAT TO DO IN EMERGENCIES

1 2 ... 347 348 349 350 351 352 353 354 355 356 357 ... 476 477

Comments to this Manuals

No comments

Dodge 2010 Challenger - Owner Manual User Manual Page 352

Comments to this Manuals

Related products and manuals for Cars Dodge 2010 Challenger - Owner Manual