Dodge 2009 Dakota User Manual download pdf (Page 258)

100

101

will remain ON. At this time, reduce speed and stop

spinning the wheels to complete the shift. There may be

a delay up to10 seconds for the shift to completeafter the

wheels have stopped spinning.

4WD LOCK-to-4WD LOW or 4WD LOW-to-4WD

LOCK

NOTE: When shifting into or out of 4WD LOW, some

gear noise may be heard. This noise is normal and is not

detrimental to the vehicle or occupants.

Shifting can be performed with the vehicle rolling 2 to

3 mph (3 to 5 km/h), or completely stopped. USE

EITHER OF THE FOLLOWING PROCEDURES:

Preferred Procedure

1. With engine RUNNING, slow vehicle to 2 to 3 mph (3

to 5 km/h).

2. Shift the transmission into NEUTRAL (depress clutch

on manual transmissions).

3. While still rolling, rotate the transfer case control

switch to the desired position.

4. After the desired position indicator light is ON (not

flashing), shift transmission back into gear (release clutch

on manual transmissions).

Alternate Procedure

1. Bring the vehicle to complete stop.

2. With the key ON and the engine either OFF or

RUNNING, shift the transmission into NEUTRAL (de-

press clutch on manual transmissions).

3. Rotate the transfer case control switch to the desired

position.

256 STARTING AND OPERATING

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 448 449

Comments to this Manuals

No comments

Dodge 2009 Dakota User Manual Page 258

Comments to this Manuals

Related products and manuals for Cars Dodge 2009 Dakota